Abbiamo appena rilasciato un client di Steam Deck aggiornato sul canale Stabile.

Rete di Steam

• Corretto il bug che causava il mancato passaggio di numerose connessioni P2P attraverso il NAT.

Note: This update is for the Steam Deck Beta and Preview channels, and includes new features that are still being tested. You can opt into this in Settings > System > System Update Channel.

These notes contain all changes since the current stable SteamOS 3.7 release, with the new changes since the previous 3.8.7 Beta noted below

New in 3.8.8

• Fixed a 3.8 regression where the performance HUD might crash when capturing performance data

• Temporarily rolled back improvements to slow charger detection

• Fixed an issue where MSI Claw controls would stay stuck in desktop mode

General

• Fixed a case where WiFi performance could become degraded until the device was put to sleep or manually reconnected

• Fixed excessive trackpad sensitivity on certain early Steam Deck LCD models

• Fixed a bug on Steam Deck OLED where rebooting would occasionally cause a loss of speaker output until rebooted again

• Initial support for upcoming Steam Machine hardware

• Added support for waking from sleep via connected Steam Controller

• Added preliminary support for HDMI VRR for devices with native HDMI output

• Updated Arch system base

• Updated graphics driver with performance and stability fixes

• Fixed an issue where "Allow Tearing" wouldn't have the intended effect in certain configurations

• Fixed a case where per-app performance settings would intermittently fail to apply when launching a game

• Substantially improved speed of future OS updates on high-speed connections

• Improved support for the screencasts in Game Mode (e.g. OBS/Discord)

• Fixed dropdown menus not appearing in some games

• Improved VRR frame pacing

• Fixed FSR badge remaining off in the performance overlay, even if it was actually active

• Improved support for games that attempt to open PDF files in external viewers

• Fixed an issue where video output could become frozen while using Remote Play

• Fixed a possible session crash when using Game Recording with certain "Maximum video height" settings

• Added missing graphics features needed for titles such as "Crimson Desert"

• Fixed an issue affecting certain titles (such as "SpongeBob SquarePants: Titans of the Tide") where the game window could have an incorrect position

• Fixed closing certain titles (such as "STAR WARS Jedi: Survivor™") and Starfield resulting in a session crash

• Improved support for certain USB racing wheels and USB devices that boot in a non-standard mode

  • Frequently these are devices that appear as USB storage devices with a driver installer, and must be switched to their normal mode by the OS

• Steam Deck controller firmware updates now display update progress on the splash screen

• Fixes issue on specific Steam Deck revisions where firmware updates could render the left controller inoperative for that session

• Fixes for experimental nested desktop mode

• Numerous stability and security updates

• Fixed an issue on certain TCL TVs where the display may remain blank using the Steam Deck Dock when VRR is enabled (requires a Dock firmware update)

Bluetooth

• Re-re-enable Bluetooth Wake for Steam Deck LCD

  • Fix for more spurious wake issues that were present in earlier attempts

Audio

• Detect HDMI channel count and expose surround configuration if available

• Add a setting to allow using Bluetooth headset mics (Bluetooth playback quality will be worse while capture is active)

• Restore internal audio device on reboot if set to "Off" in desktop mode

• Increase suspend timeout for HDMI devices so initial audio isn't cut off after a few seconds of inactivity

• Fixed a bug with switching input devices when a wired headset is plugged in

• Fixed an issue where audio underruns could be experienced after sleep/resume

Accessibility

• Added an option to force mono audio output

Desktop Mode

• KDE Plasma updated to version 6.4.3 from 6.2.5, and now uses wayland by default

  • Fixes several cases of reduced performance in Desktop Mode compared to Game Mode

  • Improved support for rotated displays

  • Better scale factor out of the box on TVs

  • Adds support for external HDR displays

  • Adds support for VRR displays

  • Adds support per-display scale factor

  • For more information, see Plasma release announcements

    • https://kde.org/announcements/plasma/6/6.3.0/

    • https://kde.org/announcements/plasma/6/6.4.0/

• Keyboard layout and language are now obeying Game Mode settings

• Improved windowing behavior for games running in Proton

• Fixed a bug in Desktop Mode causing previously open applications to not be remembered when using the 'Return to Gaming Mode' shortcut to logout

System Firmware

• Includes Steam Deck LCD BIOS v133

  • Security updates

  • Added "Memory Power Down" setup option

  • Preliminary support for hibernation

• Includes Steam Deck OLED BIOS v114

  • Security updates

  • Charging LED now changes color when charge limit is reached, rather than only at 100%

Non-Deck

• Improved compatibility with recent Intel and AMD platforms

• Greatly improved video memory management on discrete GPU platforms

• Fixed a compatibility issue with the SteamOS chainloader that could cause a boot failure on some desktop systems with recent UEFI firmware

• Power button short and long presses now supported across a wide variety of devices

• Improved controller support for OneXPlayer F1 series, GPD Win 5, GPD Win Mini, Anbernic Win600, OrangePi NEO, and Lenovo Legion Go

• Added controller support for OneXPlayer X1 series and Lenovo Legion Go 2

• Added system and controller firmware update support for the Lenovo Legion Go 2

• Added preliminary charge limiting support for Legion Go, Legion Go S, and Legion Go 2 - currently only accessible in Desktop Mode

• Added controller RGB LED color settings for the Lenovo Legion Go 2

• Added controller, TDP control, and speaker audio support for the ASUS ROG Xbox Ally series

• Reduced handheld controller input latency from 5-8ms to 100-500us

• Night mode, color vibrance, and color temperature sliders in Steam now work on Z2E and later AMD APUs

• Seamless boot fixes for Z2E and later AMD APUs

• Automatically handle internally rotated display for some third-party handhelds

• Improved motion control support for handhelds with BMI260 IMUs

• SD card reliability improvements for some third-party handhelds, including ASUS ROG Xbox Ally, Legion Go 1, Legion Go S, Legion Go 2, and MSI Claw

• Fixed washed out colors for Zotac and OneXPlayer handhelds with OLED

• Fixed some GPU hangs on Phoenix APU devices (Tales of Arise, Octopath Traveler II)

• Fixed ASUS ROG Ally power consumption from fingerprint reader while shut down

• Fixed trackpad losing functionality after sleep/resume on the Legion Go

• Fixed spurious wake-ups when using a Logitech Bolt receiver

• Add controller support for MSI Claw devices (A1M, 7 AI+ A2VM, 8 AI+ A2VM, A8 BZ2EM)

• Add controller support for OneXPlayer APEX and X1 series.

• Improved gyro response for devices that use AccelGyro3D (Legion Go 1, Claw A1M)

• Fixed a system crash on international Asus ROG Xbox Ally models

• Fix Bluetooth not working on some Intel handhelds

• Add initial firmware for upcoming Intel handhelds

Developer

• Desktop Mode now uses Wayland by default

  • X11 support may still be selected via Steam developer settings, or via `steamosctl`

• Updated Linux kernel to 6.16

• Steam now uses steamos-manager to query available desktop sessions and trigger desktop session switching

• Added support for setting the desktop password in developer settings

• Initial support for running as a Virtual Machine guest (virtio guest drivers)

• Added support for third-party devices to trigger the SteamOS boot menu via EFI variable

• Added `custom-update` verb to `atomupd-manager` for easier testing of specific builds

• System reports now include more audio debug information

• Initial support for LAVD CPU scheduler via `steamosctl set-cpu-scheduler lavd`

We have just shipped an updated Steam Deck Client to the Preview/Beta channel.

Steam Networking

• Fixed a bug causing NAT traversal to fail for many P2P connections

Abbiamo appena rilasciato un client di Steam Deck aggiornato nei canali Anteprima/Beta.

Generali

• Risolto il problema per cui le opzioni di scala, filtro e nitidezza non venivano mostrate nel menu delle prestazioni.

• Aggiornata l'interfaccia di associazione del controller.

SteamRT3 Beta

• Risolto il problema per cui gli aggiornamenti di SteamOS non riuscivano ad applicarsi quando si partecipava al client sperimentale SteamRT3.

Abbiamo appena rilasciato un client di Steam Deck aggiornato nei canali Anteprima/Beta.

Generali

• Aggiunto il supporto per la lingua malese.

Steam Input

• Aggiunto il supporto per la vibrazione del GameCube quando l'adattatore è in modalità PC.

• Risolto il problema per cui il set di azioni selezionato nel configuratore si resettava mentre si effettuavano modifiche nel configuratore.

• Corretto un bug per il quale i menu virtuali assegnati a un cambio di modalità non potevano aggiungere associazioni quando si accedeva tramite il link nella pagina originaria.

Linux SteamRT3 Beta

• Il client di Steam Deck può ora essere eseguito all'interno di un container della runtime di Steam. Questo aiuterà il client di Steam a fornire un'esperienza più coerente. Si tratta della stessa tecnologia che usiamo per i giochi di Steam.

• Il client beta SteamRT3 viene distribuito insieme al normale client beta. Puoi partecipare al client beta tramite l’opzione "Usa il client sperimentale di Steam (SteamRT3)" nel menu Impostazioni -> Sistema.

• Il client beta SteamRT3 è stato aggiornato a 64 bit.

• Segnala eventuali problemi specifici della beta di SteamRT3 nei Forum beta o nel tracker dei problemi su GitHub steam-for-linux.